The most economical and widely used shelf system for storage. Cross sections can be changed according to the load to be stacked. The most direct and fastest access is offered for pallets with a wide variety of products.
A system of shelving where products of the same type are stacked one after another. Crucially the stacked products are equivalent in weight and volume. The system where volume and height are used most efficiently. The first product in comes out last. (FILO)
Working on the FIFO principle (First In, First Out), thanks to its braked rollers, the shunting speed on the tracks can be controlled. A system of shelving that works completely according to the law of gravity, it has no maintenance cost.
Known to be the most efficient solution for stacking products of varying and oversized dimensions (eg sheets of wood, profiles, piping). With adjustable cantilevered struts, the system is analysed and then assembled according to the weight of the materials, ease of use, height of the material and the area to be covered.
A multi-storey system of shelving where walking platforms are created between the shelves in order to maximise the height in warehouses accessed by workers. The platforms constructed between the shelves are made of wood, sheet iron or grid.
Used to stack products with small volumes and light loads. Accessories may be added according to the products to be stacked, with product displays below and products on pallets stored overhead.
A system for pallets of the same size that requires no gaps for the stacking device. It can be used on projects where a rate 40 pallets per hour is sufficient. Both LIFO and FIFO configurations are possible.
An automatic loading and unloading system that is the only alternative in warehouses with both high pallet entry-exit and product turnover. Stacker cranes move both horizontally and vertically along the rail corridor.
Used for stacking small materials that are difficult to track and store, it is the most suitable solution for fast access in smart depots.
The crucial feature of a system where there is no need for building construction to take place in advance. Height is no problem and the maximum benefit is gained from a space. Sandwich panels or any preferred siding system can be applied to enclose the shelf system.
A shelf system used to save space and energy, especially in cold storage; it may be applied at existing depots as well as those built from scratch.
A closed-circuit, continuous transfer system used to convey loads or equipment from ground level or above ground. It is the system that can help to streamline and speed up the work after any depot system has been installed.
Systems made of galvanized sheet metal that are resistant to corrosion and rust at temperatures ranging from -30º to 0º.
The most economical and widely used storage rack system, its cross beams can be re-arranged according to the loads stacked. It offers the most direct and fastest access to pallets with a wide variety of products.
A unit by unit shelving application for use in narrow corridors. The stacker brings the products to be stored and places them on the service rack. The narrow aisle stacker then removes them from the service rack and places them in the stacking area.
A system for shifting boxes or parcels from one place to another with the help of rollers or drums. The system employs gravity, and is also known as Order Preparation racks.
Copyright 2024 © All Rights Reserved
Minareliçavuş OSB Mh. N. 202. Sk. No.3 Nilüfer | BURSA
T: +90 224 410 00 00
F: +90 224 411 20 05
gds@gokcelik.com